No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - IP Multicast

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of IP multicast, including IP multicast basics, IGMP, MLD, PIM (IPv4), PIM (IPv6), MSDP, multicast VPN, multicast route management (IPv4), multicast route management (IPv6), IGMP snooping, MLD snooping, static multicast MAC address, multicast VLAN, multicast network management.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MSDP Configuration

MSDP Configuration

This chapter describes how to configure the Multicast Source Discovery Protocol (MSDP) to implement multicast routing and data forwarding between Protocol Independent Multicast Sparse Mode (PIM-SM) domains and anycast rendezvous point (RP) in a PIM-SM domain.

"Router" mentioned in this chapter and the router icon used in figures refer to a conventional router or Layer 3 switch.

Updated: 2020-01-09

Document ID: EDOC1100074724

Views: 54483

Downloads: 14

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next