No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Multicast

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of IP multicast, including IP multicast basics, IGMP, MLD, PIM (IPv4), PIM (IPv6), MSDP, multicast VPN, multicast route management (IPv4), multicast route management (IPv6), IGMP snooping, MLD snooping, static multicast MAC address, multicast VLAN, multicast network management.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring MLD Snooping Proxy

Configuring MLD Snooping Proxy

MLD snooping proxy enables the switch to send MLD Query messages to user hosts in place of the upstream Layer 3 device, and send MLD Report or Done messages to the Layer 3 device in place of user hosts. This function saves bandwidth between the upstream device and switch.

Pre-configuration Tasks

Enabling MLD Snooping

Configuration Procedure

Enabling MLD Snooping Proxy is mandatory. The other configuration tasks are optional.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100074724

Views: 40906

Downloads: 13

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next