No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Multicast

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of IP multicast, including IP multicast basics, IGMP, MLD, PIM (IPv4), PIM (IPv6), MSDP, multicast VPN, multicast route management (IPv4), multicast route management (IPv6), IGMP snooping, MLD snooping, static multicast MAC address, multicast VLAN, multicast network management.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Rule for Filtering SA Messages

Configuring the Rule for Filtering SA Messages

Context

By default, a device receives all Source-Active (SA) messages that pass the RPF check, and forwards the SA messages to all MSDP peers. By configuring the filtering rule for creating, receiving, and forwarding SA messages, you can control what SA messages are transmitted between MSDP peers.

  • After you configure the rules for filtering the SA messages to be created, the device filters the (S, G) entries advertised through SA messages based on the rules, and determines whether to create the multicast source messages.
  • After you configure the rules for filtering the SA messages to be forwarded and received, the device filters the (S, G) entries advertised through SA messages based on the rules, and determines whether to accept or forward the multicast source messages.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run msdp [ vpn-instance vpn-instance-name ]

    The MSDP view is displayed.

  3. Run import-source [ acl { acl-number | acl-name } ]

    The rules for filtering multicast sources in SA messages are set.

  4. Run peer peer-address sa-policy { import | export } [ advanced-acl-number | acl-name acl-name ]

    The rules for filtering the received SA messages or the SA messages to be forwarded are set.

  5. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100074724

Views: 44368

Downloads: 13

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next