No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - IP Multicast

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of IP multicast, including IP multicast basics, IGMP, MLD, PIM (IPv4), PIM (IPv6), MSDP, multicast VPN, multicast route management (IPv4), multicast route management (IPv6), IGMP snooping, MLD snooping, static multicast MAC address, multicast VLAN, multicast network management.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the IPv4 Layer 3 Multicast Over VXLAN Configuration

Verifying the IPv4 Layer 3 Multicast Over VXLAN Configuration


Configurations about IPv4 Layer 3 multicast over VXLAN have been complete.


  • Run the display bgp mvpn all peer [ [ ipv4-address ] verbose ] command to check BGP MVPN peer configurations.
  • Run the display mvpn { vpn-instance vpn-instance-name | all-instance } ipmsi [ verbose [ group-address | source-address ] * ] command to check MVPN services' I-PMSI tunnel configurations of a specified or all VPN instances.
  • Run the display pim { vpn-instance vpn-instance-name | all-instance } routing-table command to check PIM routing table information of a specified or all VPN instances.
Updated: 2019-04-20

Document ID: EDOC1100074724

Views: 45883

Downloads: 13

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next