No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Multicast

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of IP multicast, including IP multicast basics, IGMP, MLD, PIM (IPv4), PIM (IPv6), MSDP, multicast VPN, multicast route management (IPv4), multicast route management (IPv6), IGMP snooping, MLD snooping, static multicast MAC address, multicast VLAN, multicast network management.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing Statistics About IPv4 PIM Control Packets

Clearing Statistics About IPv4 PIM Control Packets

Context

To re-collect statistics about PIM control packets, clear the existing statistics. The statistics cannot be restored after you clear them. This operation does not affect normal running of PIM.

Statistics about PIM control packets on an interface cannot be restored after you clear them. Exercise caution when clearing the statistics.

Procedure

  • Run the reset pim [ vpn-instance vpn-instance-name | all-instance ] control-message counters [ interface interface-type interface-number ] command in the user view to clear statistics about PIM control packets on an interface.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100074724

Views: 40945

Downloads: 13

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next