No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - IP Multicast

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of IP multicast, including IP multicast basics, IGMP, MLD, PIM (IPv4), PIM (IPv6), MSDP, multicast VPN, multicast route management (IPv4), multicast route management (IPv6), IGMP snooping, MLD snooping, static multicast MAC address, multicast VLAN, multicast network management.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Settings for IGMP Snooping

Default Settings for IGMP Snooping

Table 10-6 Default settings for IGMP snooping


Default Setting

IGMP snooping


IGMP snooping version

Version 2 (IGMP snooping can process IGMPv1 and IGMPv2 messages in a VLAN)

IGMP snooping interface learning

Enabled when IGMP snooping is enabled

IGMP snooping querier


IGMP snooping general query interval


IGMP snooping message suppression


IGMP snooping proxy


IGMP snooping SSM mapping


Updated: 2019-04-20

Document ID: EDOC1100074724

Views: 46482

Downloads: 13

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next