No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Multicast

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of IP multicast, including IP multicast basics, IGMP, MLD, PIM (IPv4), PIM (IPv6), MSDP, multicast VPN, multicast route management (IPv4), multicast route management (IPv6), IGMP snooping, MLD snooping, static multicast MAC address, multicast VLAN, multicast network management.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
IGMP Snooping Application

IGMP Snooping Application

Networking Description

As shown in Figure 10-6, multiple multicast sources such as Source1 and Source2 exist on a PIM network. The sources provide multicast video services for users on the LAN. Some users such as HostA and HostC on the LAN want to receive video data in multicast mode. To prevent multicast data from being broadcast on the LAN, configure IGMP snooping on Layer 2 multicast device to accurately forward multicast data on the Layer 2 network, which prevents bandwidth waste and network information leakage.

Figure 10-6 IGMP snooping networking

Deployed Features

You can deploy the following features to accurately forward multicast data on the network shown in Figure 10-6:

  • PIM and IGMP on the Layer 3 multicast device Router to route multicast data to user segments.
  • IGMP snooping on the Layer 2 device Switch so that Switch can set up and maintain a Layer 2 multicast forwarding table to forward multicast data to specified users.
  • IGMP snooping proxy after configuring IGMP snooping on Switch to release Router from processing a large number of IGMP messages.
  • IGMP snooping SSM mapping on Switch when receiver hosts running IGMPv1 or IGMPv2 want to use SSM.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100074724

Views: 45582

Downloads: 13

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next