No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Multicast

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of IP multicast, including IP multicast basics, IGMP, MLD, PIM (IPv4), PIM (IPv6), MSDP, multicast VPN, multicast route management (IPv4), multicast route management (IPv6), IGMP snooping, MLD snooping, static multicast MAC address, multicast VLAN, multicast network management.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
PIM-DM Application in a Single AS

PIM-DM Application in a Single AS

Figure 4-22 shows multicast services deployed on a small-scale network. The Interior Gateway Protocol (IGP) is running on the network and all network segments are reachable. Multicast group members are densely distributed. Hosts on this network want to receive video on demand (VoD) information, and network bandwidth needs to be used efficiently.

Figure 4-22 PIM-DM application in a single AS

Implementation Plan

As shown in Figure 4-22, HostA, HostB, and HostC are receivers of multicast video streams. The entire PIM domain runs PIM-DM. RouterA connects to the multicast source (Source); RouterB connects to the network segment of HostA; RouterD and RouterF connect to the network segment of HostB and HostC.

The network deployment must meet the following requirements:

  • PIM-DM is enabled on all router interfaces.

  • IGMP runs between the routers and hosts on a shared network segment (between RouterB and HostA, and between RouterD/RouterF and HostB/HostC).

    All router interfaces on the same network segment must run the same IGMP protocol version (IGMPv2 is recommended) and be configured with the same parameter settings, such as the query interval and timeout period of group memberships. If IGMP versions or parameter settings are inconsistent, IGMP group memberships on routers will be different.

  • After the network is deployed, HostA, HostB, and HostC can receive multicast data from Source, and the users can watch the video programs they request.

    NOTE:

    It is recommended that members be statically added to a multicast group at the network border. This improves the stability of multicast services.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100074724

Views: 44215

Downloads: 13

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next