No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Multicast

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of IP multicast, including IP multicast basics, IGMP, MLD, PIM (IPv4), PIM (IPv6), MSDP, multicast VPN, multicast route management (IPv4), multicast route management (IPv6), IGMP snooping, MLD snooping, static multicast MAC address, multicast VLAN, multicast network management.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
IPv6 PIM Configuration

IPv6 PIM Configuration

This chapter describes how to configure IPv6 PIM to allow multicast routing and forwarding on an IPv6 network.

NOTE:

PIM is implemented on an IPv6 network in the mechanism similar to that on an IPv4 network. For PIM implementation, see IPv4 PIM Configuration.

"Router" mentioned in this chapter and the router icon used in figures refer to a conventional router or Layer 3 switch.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100074724

Views: 45953

Downloads: 13

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next