No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Multicast

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of IP multicast, including IP multicast basics, IGMP, MLD, PIM (IPv4), PIM (IPv6), MSDP, multicast VPN, multicast route management (IPv4), multicast route management (IPv6), IGMP snooping, MLD snooping, static multicast MAC address, multicast VLAN, multicast network management.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Monitoring the IGMP Snooping Over VXLAN Running Status

Monitoring the IGMP Snooping Over VXLAN Running Status

Context

To check the IGMP snooping over VXLAN running status during routine maintenance, run the following display commands in any view.

Procedure

  • Run the display igmp snooping [ bridge-domain [ bd-id ] ] command to check all the IGMP snooping running parameters in a BD.
  • Run the display igmp snooping [ bridge-domain [ bd-id ] ] configuration command to check the IGMP snooping configuration in a BD.
  • Run the display igmp snooping port-info bridge-domain bd-id [ group-address group-address ] [ verbose ] command to check information about member ports.
  • Run the display igmp snooping router-port [ bridge-domain bd-id ] command to check information about router ports.
  • Run the display igmp snooping querier bridge-domain [ bd-id ] command to check information about the IGMP snooping querier.
  • Run the display igmp snooping statistics bridge-domain [ bd-id ] command to check IGMP snooping statistics.
  • Run the display multicast layer-2 ip fib [ bridge-domain bd-id [ group group-address ] ] command to check the multicast forwarding table in a BD.
  • Run the display igmp snooping group [ { interface interface-type interface-number [ pe-vid pe-vid [ ce-vid ce-vid ] ] | peer peer-ip } bridge-domain bd-id [ [ source-address source-address ] group-address group-address ] ] command to check information about multicast groups that are learned dynamically.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100074724

Views: 37993

Downloads: 13

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next