No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
OSPF_1.3.6.1.2.1.14.16.2.4 ospfIfConfigError

OSPF_1.3.6.1.2.1.14.16.2.4 ospfIfConfigError

Description

A packet is received on the non-virtual interface from a device whose configuration conflicts with the local configuration. (RouterId=[RouterId], IfIpAddress=[IfIpAddress], AddressLessIf=[AddressLessIf], PacketSrc=[PacketSrc], ConfigErrorType=[ConfigErrorType], PacketType=[PacketType], ProcessId=[ProcessId], AreaId=[AreaId])

The configurations of the interfaces used to establish an OSPF neighbor are inconsistent. Possible causes are that the Hello, Dead, or Poll timer configurations on both ends were inconsistent or the interface configurations on both ends were not performed in the same area.

Attributes

Attribute

Description

Alarm or Event

Event

Trap Severity

Warning

Mnemonic Code

ospfIfConfigError

Trap OID

1.3.6.1.2.1.14.16.2.4

Alarm ID

This is an event trap and does not involve alarm ID.

Alarm Type

This is an event trap and does not involve alarm type.

Raise or Clear

This is an event trap and does not involve alarm generation or clearance.

Match trap

This is an event trap and does not involve the matching trap.

Parameters

Parameter Description

RouterId

Indicates the router ID.

IfIpAddress

Indicates the interface IP address.

AddressLessIf

Indicates the interface index. In IP unnumbered scenarios, the value is the index of the interface whose IP address is borrowed. In non-IP unnumbered scenarios, the value is 0.

PacketSrc

Indicates the source IP address of the packet.

ConfigErrorType

Indicates the error type.

PacketType

Indicates the packet type.

ProcessId

Indicates the process ID.

AreaId

Indicates the area ID.

VB

VB OID

VB Name

VB Index

1.3.6.1.2.1.14.1.1

ospfRouterId

N/A

1.3.6.1.2.1.14.7.1.1

ospfIfIpAddress

ospfIfIpAddress;

ospfAddressLessIf;

1.3.6.1.2.1.14.7.1.2

ospfAddressLessIf

ospfIfIpAddress;

ospfAddressLessIf;

1.3.6.1.2.1.14.16.1.4

ospfPacketSrc

N/A

1.3.6.1.2.1.14.16.1.2

ospfConfigErrorType

N/A

1.3.6.1.2.1.14.16.1.3

ospfPacketType

N/A

Impact on the System

Interface parameter settings are inconsistent. The alarm can be rectified by adjusting the parameter settings. This alarm does not affect services.

Possible Causes

Cause 1: Interface configurations on both ends of the link were inconsistent.

Cause 2: The link protocol changed.

Procedure

  1. Use the display ospf interface interface-type interface-number command to check whether the interface configurations on both ends of the link are consistent.

    • If they are consistent, go to Step 3.
    • If they are inconsistent, go to Step 2.

  2. Perform the following operations based on the networking condition:

    • If the configurations on both ends can be changed to be consistent, set the same Hello timer value, Dead timer value, and Poll timer value on both ends. Then check whether the alarm is cleared.
      • If the alarm is cleared, go to Step 4.
      • If the alarm persists, go to Step 3.
    • If the configurations on both ends of the link cannot be changed to be consistent, go to Step 3.

  3. Collect trap, log, and configuration information, and contact technical support personnel technical support personnel.
  4. End.
Translation
Download
Updated: 2019-04-02

Document ID: EDOC1100074754

Views: 25794

Downloads: 31

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next