No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
LDP_1.3.6.1.4.1.2011.5.25.143.2.5 hwMplsLdpMultiLinkCfgInconsistent

LDP_1.3.6.1.4.1.2011.5.25.143.2.5 hwMplsLdpMultiLinkCfgInconsistent

Description

MPLS LDP multi-link configurations are inconsistent. (VrfName=[VrfName], PeerLsrId=[PeerLsrId], LocalLsrId=[LocalLsrId], ConfigIfName=[ConfigIfName], ConfigRmtPeerIp=[ConfigRmtPeerIp], ConfigType=[ConfigType], EffectKa=[EffectKa], EffectTa=[EffectTa], EffectLam=[EffectLam])

An alarm is generated because MPLS LDP multi-link configurations are inconsistent.

Attributes

Attributes

Description

Alarm or Event

Alarm

Trap Severity

Warning

Mnemonic Code

hwMplsLdpMultiLinkCfgInconsistent

Trap OID

1.3.6.1.4.1.2011.5.25.143.2.5

Alarm ID

0x00F10216

Alarm Type

communicationsAlarm

Raise or Clear

Raise

Match trap

LDP_1.3.6.1.4.1.2011.5.25.143.2.6 hwMplsLdpMultiLinkCfgInconsistentClear

Parameters

Parameter Description
VrfName

VRF name of LDP session exists.

PeerLsrId

LDP session ID.

LocalLsrId

Local LSR ID.

ConfigIfName

Configure the current interface name.

ConfigRmtPeerIp

Configure the IP address of the remote session.

ConfigType

Configuration inconsistent type.

EffectKa

KeepAlive value used by the LDP session.

EffectTa

LDP transport addresses used by the session.

EffectLam

Peer use label advertisement mode.

VB Parameters

VB OID

VB Name

VB Index

1.3.6.1.4.1.2011.5.25.143.1.74.1.7

hwMplsLdpConsistentState

hwMplsLdpVrfIndex hwMplsLdpPeerLdpId

hwMplsLdpLocalLdpId hwMplsLdpConfigIfIndex

hwMplsLdpConfigRemotePeerIP

hwMplsLdpConfigType

1.3.6.1.4.1.2011.5.25.143.1.74.1.8

hwMplsLdpEffectKeepAlive

hwMplsLdpVrfIndex hwMplsLdpPeerLdpId

hwMplsLdpLocalLdpId hwMplsLdpConfigIfIndex

hwMplsLdpConfigRemotePeerIP

hwMplsLdpConfigType

1.3.6.1.4.1.2011.5.25.143.1.74.1.9

hwMplsLdpEffectTransportAddr

hwMplsLdpVrfIndex hwMplsLdpPeerLdpId

hwMplsLdpLocalLdpId hwMplsLdpConfigIfIndex

hwMplsLdpConfigRemotePeerIP

hwMplsLdpConfigType

1.3.6.1.4.1.2011.5.25.143.1.74.1.10

hwMplsLdpEffectLabelAdvertisementMode

hwMplsLdpVrfIndex hwMplsLdpPeerLdpId

hwMplsLdpLocalLdpId hwMplsLdpConfigIfIndex

hwMplsLdpConfigRemotePeerIP

hwMplsLdpConfigType

Impact on the System

When the LDP session configuration multilink, if circumstances link parameter configuration inconsistencies exist, it will cause the link can not be added to the session, multi-link can not be created as expected.

Possible Causes

When LDP sessions are configured with multiple links, link parameters may not be consistent.

Procedure

  1. By modifying the configuration, configuration parameters expectancy was added to a plurality of links consistent with the same session.
Translation
Download
Updated: 2019-04-02

Document ID: EDOC1100074754

Views: 17444

Downloads: 25

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next