No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
L3VPN_1.3.6.1.2.1.10.166.11.0.6 mplsL3VpnNumVrfRouteMaxThreshCleared

L3VPN_1.3.6.1.2.1.10.166.11.0.6 mplsL3VpnNumVrfRouteMaxThreshCleared

Description

The number of routes in the VPN instance fell below the maximum value. (VpnInstanceName=[VpnInstanceName], VpnInstanceRouteCount=[VpnInstanceRouteCount], MaxValue=[MaxValue])

The number of public network route prefixes fell below the maximum limit specified using the ip prefix-limit command.

The number of VPN route prefixes in the VPN instance fell below the maximum limit specified using the prefix limit command.

Attributes

Attribute

Description

Alarm or Event

Alarm

Trap Severity

Critical

Mnemonic Code

L3VPN_MIB_TRAP_THRESH_CLEARED

Trap OID

1.3.6.1.2.1.10.166.11.0.6

Alarm ID

0x09110001

Alarm Type

qualityOfServiceAlarm

Raise or Clear

Clear

Match trap

L3VPN_1.3.6.1.2.1.10.166.11.0.4 mplsL3VpnVrfNumVrfRouteMaxThreshExceeded

Parameters

Name

Meaning

VpnInstanceName

Indicates the name of a VPN instance.

NOTE:

If a VPN instance name is "_public_", the alarm cause is that the number of public network route prefixes exceeds or is about to exceed the maximum limit.

VpnInstanceRouteCount

Indicates the number of existing route prefixes.

MaxValue

Indicates the maximum number of route prefixes allowed.

VB

VB OID

VB Name

VB Index

1.3.6.1.2.1.10.166.11.1.3.1.1.3

mplsL3VpnVrfPerfCurrNumRoutes

N/A

1.3.6.1.2.1.10.166.11.1.2.2.1.10

mplsL3VpnVrfConfHighRteThresh

mplsL3VpnVrfName;

Impact on the System

After the number of public network route prefixes fell below the maximum limit, public network routes can be received normally.

After the number of VPN route prefixes fell below the maximum limit, VPN routes can be received normally.

Possible Causes

1. The number of public network route prefixes reached the maximum limit, and then it fell below the maximum limit.

2. The maximum limit for public network route prefixes was adjusted higher using the ip prefix-limit command.

3. The number of VPN route prefixes reached the maximum limit, and then it fell below the maximum limit.

4. The maximum limit for VPN route prefixes was adjusted higher using the prefix limit command.

Procedure

  • This alarm message is informational only, and no action is required.
Translation
Download
Updated: 2019-04-02

Document ID: EDOC1100074754

Views: 25073

Downloads: 31

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next