No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
STACKMNG_1.3.6.1.4.1.2011.5.25.183.1.22.25 hwStackConfigDifferent

STACKMNG_1.3.6.1.4.1.2011.5.25.183.1.22.25 hwStackConfigDifferent

Description

The stack configuration is inconsistent. (hwStackId=[hwStackId], hwStackReason=[hwStackReason], hwStackIdIndex=[hwStackIdIndex])

The current stack configuration is inconsistent with the stack configuration for next startup.

Attribute

Attribute

Description

Alarm or Event

Event

Trap Severity

Warning

Mnemonic Code

hwStackConfigDifferent

Trap OID

1.3.6.1.4.1.2011.5.25.183.1.22.25

Alarm ID

This is an event trap and does not involve alarm ID.

Alarm Type

This is an event trap and does not involve alarm type.

Raise or Clear

This is an event trap and does not involve alarm generation or clearance.

Match trap

This is an event trap and does not involve the matching trap.

Parameters

Parameter Description

hwStackId

Stack member ID.

hwStackReason

Alarm cause.

hwStackIdIndex

ID index of the stack member.

VB

VB OID

VB Name

VB Index

1.3.6.1.4.1.2011.5.25.183.1.25.1.6

hwStackId

hwStackIdIndex

1.3.6.1.4.1.2011.5.25.183.1.32.12

hwStackReason

N/A

Impact on the System

When the stack system starts, the stack may fail to be set up.

Possible Causes

1: The offline configuration of a newly added device exists on the master switch, is inconsistent with the current configuration, and is used as the configuration for next startup.

2: The stack configuration is manually modified to be inconsistent with the stack configuration for next startup.

Procedure

  1. Run the display stack configuration command to check whether the current stack configuration is consistent with the stack configuration for next startup. If not, manually modify the stack configuration.
Translation
Download
Updated: 2019-04-02

Document ID: EDOC1100074754

Views: 21465

Downloads: 30

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next