No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
OSPF_1.3.6.1.2.1.14.16.2.8 ospfIfRxBadPacket

OSPF_1.3.6.1.2.1.14.16.2.8 ospfIfRxBadPacket

Description

An OSPF packet that is received on a non-virtual interface cannot be parsed. (RouterId=[RouterId], IfIpAddress=[IfIpAddress], AddressLessIf=[AddressLessIf], PacketSrc=[PacketSrc], PacketType=[PacketType])

An OSPF packet that could not be parsed was received from a non-virtual interface because the Huawei device was attacked or failed to communicate with non-Huawei devices.

Attributes

Attribute

Description

Alarm or Event

Event

Trap Severity

Error

Mnemonic Code

ospfIfRxBadPacket

Trap OID

1.3.6.1.2.1.14.16.2.8

Alarm ID

This is an event trap and does not involve alarm ID.

Alarm Type

This is an event trap and does not involve alarm type.

Raise or Clear

This is an event trap and does not involve alarm generation or clearance.

Match trap

This is an event trap and does not involve the matching trap.

Parameters

Parameter Description

RouterId

Indicates the router ID.

IfIpAddress

Indicates the interface IP address.

AddressLessIf

Indicates the interface index.

PacketSrc

Indicates the source IP address of packets.

PacketType

Indicates the packet type.

VB

VB OID

VB Name

VB Index

1.3.6.1.2.1.14.1.1

ospfRouterId

N/A

1.3.6.1.2.1.14.7.1.1

ospfIfIpAddress

ospfIfIpAddress;

ospfAddressLessIf;

1.3.6.1.2.1.14.7.1.2

ospfAddressLessIf

ospfIfIpAddress;

ospfAddressLessIf;

1.3.6.1.2.1.14.16.1.4

ospfPacketSrc

N/A

1.3.6.1.2.1.14.16.1.3

ospfPacketType

N/A

Impact on the System

This trap message is generated when a common interface receives an incorrect packet and discards this packet, which may change the state of neighbor relationship to Down.

Possible Causes

An incorrect packet was generated on the peer non-virtual interface.

Procedure

  1. Run the display ospf error packet command in the diagnosis view to check the incorrect packet. This trap message indicates that the packet cannot be parsed. Save information about the incorrect packet.
  2. Collect trap, log, and configuration information, and contact technical support personnel technical support personnel.
  3. End.
Translation
Download
Updated: 2019-04-02

Document ID: EDOC1100074754

Views: 17592

Downloads: 25

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next