No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
OSPFV3_1.3.6.1.2.1.191.0.6 ifrxbadpacket

OSPFV3_1.3.6.1.2.1.191.0.6 ifrxbadpacket

Description

An OSPFV3 packet that is received on a non-virtual interface cannot be parsed. (RouterId=[RouterId], IfIndex=[IfIndex], IfInstId=[IfInstId], IfState=[IfState], PacketSrc=[PacketSrc], PacketType=[PacketType])

An OSPFv3 packet that could not be parsed was received from a non-virtual interface. The possible cause is that the local device was attacked or the local device failed to connect to a non-Huawei device.

Attributes

Attribute

Description

Alarm or Event

Event

Trap Severity

Error

Mnemonic Code

ifrxbadpacket

Trap OID

1.3.6.1.2.1.191.0.6

Alarm ID

This is an event trap and does not involve alarm ID.

Alarm Type

This is an event trap and does not involve alarm type.

Raise or Clear

This is an event trap and does not involve alarm generation or clearance.

Match trap

This is an event trap and does not involve the matching trap.

Parameters

Parameter Description

RouterId

Indicates the router ID.

IfIndex

Indicates the interface index.

IfInstId

Indicates the instance ID.

IfState

Indicates the interface status.

  • 1: Down
  • 2: Attempt
  • 3: Init
  • 4: 2–Way
  • 5: Exstart
  • 6: Exchange
  • 7: Loading
  • 8: Full

PacketSrc

Indicates the source IP address of packets.

PacketType

Indicates the packet type.

  • 1: Hello
  • 2: DD(Data base Description) packet
  • 3: LS Request
  • 4: LS Update
  • 5: LS Acknowledgement
  • 6: NULL packet

VB

VB OID

VB Name

VB Index

1.3.6.1.2.1.191.1.1.1

ospfv3RouterId

N/A

1.3.6.1.2.1.191.1.7.1.12

ospfv3IfState

ospfv3IfIndex;

ospfv3IfInstId;

1.3.6.1.2.1.191.1.14.3

ospfv3PacketSrc

N/A

1.3.6.1.2.1.191.1.14.2

ospfv3PacketType

N/A

Impact on the System

This trap message is generated when a common interface receives a packet that cannot be parsed and discards this packet, which may change the neighbor status to Down.

Possible Causes

An incorrect packet was generated on the peer non-virtual interface.

Procedure

  1. Run the display ospfv3 error packet command in the diagnosis view to check the incorrect packet. This trap message indicates that the packet cannot be parsed. Save information about the incorrect packet.
  2. Collect the alarm information, log information, and configuration information, and then contact technical support personnel technical support personnel.
  3. End.
Translation
Download
Updated: 2019-04-02

Document ID: EDOC1100074754

Views: 22490

Downloads: 30

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next