No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
LDP_1.3.6.1.2.1.10.166.4.0.1 Session-Retry

LDP_1.3.6.1.2.1.10.166.4.0.1 Session-Retry

Description

The number of session initialization messages exceeds the mplsLdpEntityInitSessionThreshold. (PeerLdpId=[PeerLdpId],EntityIndex=[EntityIndex],Times=[InitSessionThreshold])

mplsLdpEntityInitSessionThreshold was not zero and the sequence number of an Initialization message exceeded mplsLdpEntityInitSessionThreshold.

Attributes

Attribute

Description

Alarm or Event

Event

Trap Severity

Warning

Mnemonic Code

Session-Retry

Trap OID

1.3.6.1.2.1.10.166.4.0.1

Alarm ID

This is an event trap and does not involve alarm ID.

Alarm Type

This is an event trap and does not involve alarm type.

Raise or Clear

This is an event trap and does not involve alarm generation or clearance.

Match trap

This is an event trap and does not involve the matching trap.

Parameters

Parameter Description
PeerLdpId

LDP ID

EntityIndex

LDP instance index

InitSessionThreshold

Indicates the number of attempts for session negotiation through Init messages.

VB

VB OID

VB Name

VB Index

1.3.6.1.2.1.10.166.4.1.2.3.1.11

mplsLdpEntityInitSessionThreshold

mplsLdpEntityLdpId

mplsLdpEntityIndex

Impact on the System

The session cannot be set up. The original services or newly added ones that depend on the session are interrupted.

Possible Causes

Cause 1: The local end no longer supports the DoD mode but the peer supports DoD mode, leading to label advertisement mode inconsistency.

Cause 2: Keepalive time negotiation fails because the Keepalive time value on the peer end is set to 0. In this version, the minimum value is 30. This means the log is displayed when the peer Keepalive time is 0s.

Procedure

  1. Check that devices on both ends of the LSP are Huawei devices.

    • If both of them are Huawei devices, go to Step 2.
    • If one device is a non-Huawei device, go to Step 3.

  2. Check the cause for this trap message and go to Step 5.
  3. Check the Huawei device configurations. Run the display this in the MPLS LDP view to check whether other configurations exist.

    • If other configurations are displayed, go to Step 4.
    • If no other configuration is displayed, the trap message is triggered by an error in the peer device. Go to Step 6.

  4. Record configuration information and go to Step 5.
  5. Collect the alarm information, log information, and configuration information, and then contact technical support personnel.
  6. Ask the customer to contact technical support personnel of the vendor to troubleshoot the problem and go to Step 7.
  7. End.
Translation
Download
Updated: 2019-04-02

Document ID: EDOC1100074754

Views: 25709

Downloads: 31

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next