No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
DEVM_1.3.6.1.4.1.2011.5.25.183.1.22.33 hwStackMacInconsistence

DEVM_1.3.6.1.4.1.2011.5.25.183.1.22.33 hwStackMacInconsistence

Description

The stack system's MAC address is not the manufacture MAC address of any member device.(hwStackSystemMac=[hwStackSystemMac])

After a stack splits, the stack system MAC address is not the factory MAC address of any member device.

Attribute

Attribute

Description

Alarm or Event

Alarm

Trap Severity

Warning

Mnemonic Code

hwStackMacInconsistence

Trap OID

1.3.6.1.4.1.2011.5.25.183.1.22.33

Alarm ID

0x09e02024

Alarm Type

equipmentAlarm

Raise or Clear

Raise

Match trap

DEVM_1.3.6.1.4.1.2011.5.25.183.1.22.34 hwStackMacInconsistenceResume

Parameters

Name Meaning

hwStackSystemMac

Indicates the stack system MAC address.

VB

VB OID

VB Name

VB Index

1.3.6.1.4.1.2011.5.25.183.1.4

hwStackSystemMac

N/A

Impact on the System

A MAC address conflict may occur.

Possible Causes

Cause 1: The configured stack system MAC address is not the factory MAC address of any member device.

Cause 2: The stack system MAC address is not the factory MAC address of any member device.

Procedure

  • Cause 1: The configured stack system MAC address is not the factory MAC address of any member device.
    1. Run the display system mac-address command in the stack to check the configured stack system MAC address and factory MAC addresses of all member devices.

      • If no MAC address conflict occurs, you can run the set system mac-address inconsistence-alarm off command in the stack management view to disable the alarm function.
      • If a MAC address conflict occurs, you can run the undo set system mac-address command in the stack management view to delete the configured stack system MAC address and then run the set system mac-address switch-delay immediately command to change the stack system MAC address to the MAC address of the current master switch.

  • Cause 2: The stack system MAC address is not the factory MAC address of any member device.
    1. Run the display system mac-address command in the stack to check the stack system MAC address and factory MAC addresses of all member devices.

      • If no MAC address conflict occurs, you can run the set system mac-address inconsistence-alarm off command in the stack management view to disable the alarm function.
      • If a MAC address conflict occurs, you can run the set system mac-address switch-delay immediately command to change the stack system MAC address to the MAC address of the current master switch.

Translation
Download
Updated: 2019-04-02

Document ID: EDOC1100074754

Views: 21865

Downloads: 30

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next