No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
FCOE_1.3.6.1.4.1.2011.5.25.303.2.1 hwFCoEPortLoseVlan

FCOE_1.3.6.1.4.1.2011.5.25.303.2.1 hwFCoEPortLoseVlan

Description

The FCoE VLAN that it is configured on the interface is not the same as the VLAN in the packet. (interface name = [IfName], VLAN = [vlanId])

The FCoE VLAN configured on the interface differed from that assigned by the FCF.

Attributes

Attribute

Description

Alarm or Event

Event

Trap Severity

Warning

Mnemonic Code

hwFCoEPortLoseVlan

Trap OID

1.3.6.1.4.1.2011.5.25.303.2.1

Alarm ID

This is an event trap and does not involve alarm ID.

Alarm Type

This is an event trap and does not involve alarm type.

Raise or Clear

This is an event trap and does not involve alarm generation or clearance.

Match trap

This is an event trap and does not involve the matching trap.

Parameters

Name Meaning

interface name

Indicates the name of the interface.

VLAN

Indicates the ID of the FCoE VLAN.

VB

VB OID

VB Name

VB Index

1.3.6.1.4.1.2011.5.25.303.1.1

hwFCoEIfName

N/A

1.3.6.1.4.1.2011.5.25.303.1.2

hwFCoEVlan

N/A

Impact on the System

FCoE virtual links fails to be established, and FCoE traffic cannot be forwarded correctly.

Possible Causes

Cause 1: The configurations were incorrect.

Cause 2: The FCF assigned invalid FCoE VLANs.

Procedure

  • Cause 1: The configurations were incorrect.
    1. Run the display vlan [ vlan-id [ verbose ] ] command to check whether the interface is added to the FCoE VLAN.

      • If not, run the port trunk allow-pass vlan { { vlan-id1 [ to vlan-id2 ] } &<1-10> | all } command on the interface that reported the alarm or run the port hybrid tagged vlan { { vlan-id1 [ to vlan-id2 ] }&<1-10> | all } command to add the interface to the FCoE VLAN.
      • If so, go to step 2.

    2. Collect traps, logs, and configurations, and contact technical support engineers.
  • Cause 2: The FCF assigned invalid FCoE VLANs.

    Collect traps, logs, and configurations, and contact technical support engineers.

Translation
Download
Updated: 2019-04-02

Document ID: EDOC1100074754

Views: 22198

Downloads: 30

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next