No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
LCS_1.3.6.1.4.1.2011.5.25.142.2.38 hwGtlFeatureFunInactive

LCS_1.3.6.1.4.1.2011.5.25.142.2.38 hwGtlFeatureFunInactive

Description

Item is inactive. (ItemName=[hwGtlItemName], FeatureName=[hwGtlFeatureName])

License is inactivate.

Attributes

Attribute

Description

Alarm or Event

Alarm

Trap Severity

Critical

Mnemonic Code

hwGtlFeatureFunInactive

Trap OID

1.3.6.1.4.1.2011.5.25.142.2.38

Alarm ID

0x00F102a4

Alarm Type

equipmentAlarm

Raise or Clear

Raise

Match trap

LCS_1.3.6.1.4.1.2011.5.25.142.2.39 hwGtlFeatureFunInactiveCleared

Parameters

Parameter Description

hwGtlItemName

Function item name.

hwGtlFeatureName

Function name.

VB

None

Impact on the System

This alarm may cause service functions to be abnormal.

Possible Causes

Cause 1: The license file was not loaded.

Cause 2: The license file has not been activated after being uploaded to the device.

Cause 3: The license file does not contain the corresponding control item although it has been activated.

Procedure

  • Cause 1: The license file was not loaded.

    Run the display license command to check the current license activation status and other detailed information. If the license file has not been loaded, load and activate it.

  • Cause 2: The license file has not been activated after being uploaded to the device.

    Run the display license command to check the current license activation status and other detailed information. If the license file has not been activated, activate it.

  • Cause 3: The license file does not contain the corresponding control item although it has been activated.

    Apply to Huawei for a license file that contains the corresponding control items and activate the license file.

Translation
Download
Updated: 2019-04-02

Document ID: EDOC1100074754

Views: 17106

Downloads: 25

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next