No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.63 hwMplsLspThresholdExceed

MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.63 hwMplsLspThresholdExceed

Description

The lsp count exceeds the threshold. (hwMplsLspProtocol=[LspProtocol], hwMplsLspCurrentCount=[LspCurrentCount], hwMplsLspThreshold=[LspThreshold], hwMplsLspTotalCount=[LspTotalCount])

The number of LSPs exceeded the upper threshold.

Attributes

Attributes

Description

Alarm or Event

Alarm

Trap Severity

Error

Mnemonic Code

hwMplsLspThresholdExceed

Trap OID

1.3.6.1.4.1.2011.5.25.121.2.1.63

Alarm ID

0x00f10045

Alarm Type

qualityOfServiceAlarm

Raise or Clear

Raise

Match trap

MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.64 hwMplsLspThresholdExceedClear

Parameters

Parameters Description

hwMplsLspProtocol

LSP protocol type

hwMplsLspCurrentCount

Number of the current LSPs

hwMplsLspThreshold

Upper threshold of LSPs

hwMplsLspTotalCount

Upper limit of supported hwMplsLspProtocol LSPs

VB

VB OID

VB Name

VB Index

1.3.6.1.4.1.2011.5.25.121.2.2.4

hwMplsLspProtocol

N/A

1.3.6.1.4.1.2011.5.25.121.2.2.7

hwMplsLspCurrentCount

N/A

1.3.6.1.4.1.2011.5.25.121.2.2.5

hwMplsLspThreshold

N/A

1.3.6.1.4.1.2011.5.25.121.2.2.6

hwMplsLspTotalCount

N/A

Impact on the System

The number of hwMplsLspProtocol LSPs has reached the upper threshold. If the number continues to increase, which exceeds the threshold, services will be affected.

Possible Causes

The number of the current hwMplsLspProtocol LSPs exceeded the upper threshold.

Procedure

  1. Run the display mpls lsp command to check whether unwanted hwMplsLspProtocol LSPs exist on the device.
    • If no unwanted LSPs exist, go to Step 3.
    • If unwanted LSPs exist, go to Step 2.
  2. Use methods, such as modifying a policy for establishing LSPs, to suppress the establishment of unwanted LSPs. Then, check whether the alarm is cleared.
    • If so, go to Step 4.
    • If not, go to Step 3.
  3. Contact technical support personnel.
  4. End.
Translation
Download
Updated: 2019-04-02

Document ID: EDOC1100074754

Views: 22114

Downloads: 30

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next