No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ISIS_1.3.6.1.3.37.2.0.3 isisCorruptedLSPDetected

ISIS_1.3.6.1.3.37.2.0.3 isisCorruptedLSPDetected

Description

The checksum of LSP is wrong. (isisSysInstance=[isisSysInstance], isisSysLevelIndex=[isisSysLevelIndex], isisPduLspId=[isisPduLspId])

The checksum of an LSP was incorrect.

Attributes

Attribute

Description

Alarm or Event

Event

Trap Severity

Error

Mnemonic Code

isisCorruptedLSPDetected

Trap OID

1.3.6.1.3.37.2.0.3

Alarm ID

This is an event trap and does not involve alarm ID.

Alarm Type

This is an event trap and does not involve alarm type.

Raise or Clear

This is an event trap and does not involve alarm generation or clearance.

Match trap

This is an event trap and does not involve the matching trap.

Parameters

Parameter Description

isisSysInstance

Indicates the ID of the IS-IS process.

isisSysLevelIndex

Indicates the IS-IS level:
  • 1: Level-1

  • 2: Level-2

isisPduLspId

LSP ID.

VB

VB OID

VB Name

VB Index

1.3.6.1.3.37.1.1.1.1.1

isisSysInstance

isisSysInstance

1.3.6.1.3.37.1.1.1.1.1

isisSysLevelIndex

isisSysInstance

isisSysLevelIndex

1.3.6.1.3.37.1.10.1.1.1

isisPduLspId

isisSysInstance

Impact on the System

The LSP checksum failure will lead to the reset of the IS-IS process and relevant IS-IS services will be interrupted.

Possible Causes

During the LSP refreshing period, a fault might occur in the memory, and consequently the LSP was modified.

Procedure

  1. Run the display memory command to check whether the memory usage exceeds the threshold (approximately 80%).

    • If so, go to Step 3.

    • If not, go to Step 2.

  2. Run the reset isis all command to restart the IS-IS process. After the IS-IS process is restarted, check whether the trap is cleared.

    • If so, go to Step 4.

    • If not, go to Step 3.

  3. Collect the trap information, log information, and configuration of the , and contact technical support personnel technical personnel.
  4. End.
Translation
Download
Updated: 2019-04-02

Document ID: EDOC1100074754

Views: 19436

Downloads: 29

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next