No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Unicast Routing

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of IP Unicast Routing, including IP Routing, Static Route, RIP, RIPng, OSPF, OSPFv3, IPv4 IS-IS, IPv6 IS-IS, BGP, Routing Policy, and PBR.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
OSPF Smart-discover

OSPF Smart-discover

Definition

Generally, routers periodically send Hello packets through OSPF interfaces. That is, a Router sends Hello packets at the Hello interval controlled by a Dead timer. Because Hello packets are sent at a fixed interval, the establishment of OSPF neighbor relationships is slowed down.

Enabling Smart-discover can speed up the establishment of OSPF neighbor relationships in specific scenarios.

Table 5-12 OSPF Smart-discover

Smart-discover Configured

Processing

No

  • Hello packets are sent only when the Hello timer expires.

  • The gap between the sending of two Hello packets is the Hello interval.

  • Neighbors keep waiting to receive Hello packets within the Hello interval.

Yes

  • Hello packets are sent directly regardless of whether the Hello timer expires.

  • Neighbors can receive packets rapidly and perform status transition immediately.

Implementation

In the following scenarios, an interface enabled with Smart-discover can send Hello packets to neighbors without waiting for the expiration of the Hello timer:

  • The neighbor status becomes 2-way for the first time.

  • The neighbor status changes from 2-way or a higher state to Init.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100074760

Views: 44374

Downloads: 58

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next