No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Unicast Routing

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of IP Unicast Routing, including IP Routing, Static Route, RIP, RIPng, OSPF, OSPFv3, IPv4 IS-IS, IPv6 IS-IS, BGP, Routing Policy, and PBR.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Setting the Default Preference for IPv6 Static Routes

(Optional) Setting the Default Preference for IPv6 Static Routes

Context

The default preference of IPv6 static routes affects route selection. When an IPv6 static route is configured, the default preference is used if no preference is specified for the static route.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run ipv6 route-static default-preference preference

    The default preference of IPv6 static routes is set.

    By default, the preference of static routes is 60.

    After the default preference is reconfigured, the new default preference is valid only for new IPv6 static routes.

  3. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100074760

Views: 44324

Downloads: 58

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next