No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Unicast Routing

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of IP Unicast Routing, including IP Routing, Static Route, RIP, RIPng, OSPF, OSPFv3, IPv4 IS-IS, IPv6 IS-IS, BGP, Routing Policy, and PBR.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the Preference of OSPF Routes

Setting the Preference of OSPF Routes

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run ospf [ process-id ]

    The OSPF process view is displayed.

  3. Run preference [ ase | inter | intra ] { preference | route-policy route-policy-name } *

    The preference of OSPF routes is set.

    • The parameter ase is used to set the preference of AS-external routes.
    • The parameter

      inter is used to set the preference of inter-area routes.

    • The parameter

      intra is used to set the preference of intra-area routes.

    • The parameter preference specifies the preference of OSPF routes. A smaller value of preference indicates a higher preference.
    • The parameter route-policy route-policy-name indicates that a routing policy is used to set the preference of specified routes.

    By default, the preference of OSPF routes is 10. When the parameter ase is specified, the default preference of AS-external routes is 150.

  4. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100074760

Views: 58030

Downloads: 63

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next