No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Unicast Routing

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of IP Unicast Routing, including IP Routing, Static Route, RIP, RIPng, OSPF, OSPFv3, IPv4 IS-IS, IPv6 IS-IS, BGP, Routing Policy, and PBR.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the IPv6 BFD for IS-IS Configuration

Verifying the IPv6 BFD for IS-IS Configuration

Prerequisites

The configurations of dynamic IPv6 BFD for IS-IS are complete.

Procedure

  • Run the display isis ipv6 bfd [ process-id | vpn-instance vpn-instance-name ] session { all | peer ipv6-address | interface interface-type interface-number } command to check information about an IPv6 BFD session for IS-IS.
  • Run the display isis ipv6 bfd [ process-id | vpn-instance vpn-instance-name ] interface command to check the information about an interface enabled with IPv6 BFD for IS-IS.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100074760

Views: 57433

Downloads: 62

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next