No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Unicast Routing

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of IP Unicast Routing, including IP Routing, Static Route, RIP, RIPng, OSPF, OSPFv3, IPv4 IS-IS, IPv6 IS-IS, BGP, Routing Policy, and PBR.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Displaying and Maintaining a Routing Table

Displaying and Maintaining a Routing Table

Context

You can view routing table information to learn about the network topology and locate routing faults. The following describes the commands used to display and maintain routing table information.

The display commands can be used in all views. The reset commands are used in the user view.

Procedure

  • Run the display ip routing-table command to check brief information about the active routes in the IPv4 routing table.
  • Run the display ip routing-table verbose command to check detailed information about the IPv4 routing table.
  • Run the display ip routing-table ip-address [ mask | mask-length ] [ longer-match ] [ verbose ] command to check detailed information about the routes with the specified destination address in the IPv4 routing table.
  • Run the display ip routing-table ip-address1 { mask1 | mask-length1 } ip-address2 { mask2 | mask-length2 } [ verbose ] command to check detailed information about the routes within the specified destination address range in the IPv4 routing table.
  • Run the display ip routing-table ip-prefix ip-prefix-name [ verbose ] command to check detailed information about the routes that match the specified IP prefix list in the IPv4 routing table.
  • Run the display ip routing-table protocol protocol [ inactive | verbose ] command to check detailed information about the routes discovered by the specified routing protocol in the IPv4 routing table.
  • Run the display ip routing-table statistics command to check route statistics in the IPv4 routing table.
  • Run the display ipv6 routing-table command to check brief information about the active routes in the IPv6 routing table.
  • Run the display ipv6 routing-table verbose command to check detailed information about the IPv6 routing table.
  • Run the display ipv6 routing-table protocol protocol [ inactive | verbose ] command to check detailed information about the routes discovered by the specified routing protocol in the IPv6 routing table.
  • Run the display ipv6 routing-table statistics command to check route statistics in the IPv6 routing table.
  • To check brief information about the IPv6 routing table, run the display ipv6 routing-table [ vpn-instance vpn-instance-name ] simple command.
  • Run the reset ip routing-table statistics protocol { all | protocol } command to clear route statistics in the IPv4 routing table.
  • Run the reset ipv6 routing-table statistics protocol { all | protocol } command to clear route statistics in the IPv6 routing table.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100074760

Views: 57343

Downloads: 62

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next