No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Unicast Routing

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of IP Unicast Routing, including IP Routing, Static Route, RIP, RIPng, OSPF, OSPFv3, IPv4 IS-IS, IPv6 IS-IS, BGP, Routing Policy, and PBR.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling RIP

Enabling RIP

Context

Enabling RIP is the prerequisite for all RIP-related configurations. If you run the RIP commands in the interface view before enabling RIP, the configurations take effect only after RIP is enabled.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run rip [ process-id ] [ vpn-instance vpn-instance-name ]

    RIP is enabled and the RIP view is displayed.

    If a VPN instance is specified, the RIP process belongs to this VPN instance. If no VPN instance is specified, the RIP process belongs to a public network instance.

  3. (Optional) Run description text

    Descriptions for RIP processes are configured.

  4. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100074760

Views: 47106

Downloads: 58

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next