No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Unicast Routing

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of IP Unicast Routing, including IP Routing, Static Route, RIP, RIPng, OSPF, OSPFv3, IPv4 IS-IS, IPv6 IS-IS, BGP, Routing Policy, and PBR.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Preventing an Interface from Dynamically Establishing an IPv6 BFD Session

(Optional) Preventing an Interface from Dynamically Establishing an IPv6 BFD Session

You can disable certain IS-IS interfaces from dynamically establishing IPv6 BFD sessions.

Context

After the ipv6 bfd all-interfaces enable command is used for an IS-IS process on a P2P network, all IS-IS interfaces whose neighbors are Up establish dynamic BFD sessions; all IS-IS interfaces whose neighbors are Up on a broadcast network establish BFD sessions between DISs and non-DISs. If you do not expect certain IS-IS interfaces to establish dynamic BFD sessions, you can disable these interfaces from dynamically establishing BFD sessions. Do as follows to disable the specified interface from dynamically establishing BFD sessions:

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number

    The interface view is displayed.

  3. Run isis ipv6 bfd block

    The interface is prevented from dynamically establishing a BFD session.

  4. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100074760

Views: 57889

Downloads: 63

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next