No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Unicast Routing

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of IP Unicast Routing, including IP Routing, Static Route, RIP, RIPng, OSPF, OSPFv3, IPv4 IS-IS, IPv6 IS-IS, BGP, Routing Policy, and PBR.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Multi-Process and Multi-Instance

Multi-Process and Multi-Instance

The multi-process feature associates a RIP process with multiple interfaces, ensuring that the specific process performs all the protocol-related operations only on these interfaces. With the multi-process feature, multiple RIP processes can run on a device independently. Route exchange between RIP processes is similar to route exchange between routing protocols.

RIP multi-instance associates a VPN instance with a RIP process so that the VPN instance can be associated with all interfaces on this process.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100074760

Views: 45561

Downloads: 58

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next