No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Unicast Routing

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of IP Unicast Routing, including IP Routing, Static Route, RIP, RIPng, OSPF, OSPFv3, IPv4 IS-IS, IPv6 IS-IS, BGP, Routing Policy, and PBR.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Resetting IS-IS

Resetting IS-IS

Context

To reset IS-IS, reset IS-IS data structure, neighbor relationship and packets

The IS-IS data structure cannot be restored after you reset it. All the previous structure information and the neighbor relationship are reset. Exercise caution when running this command.

The specified IS-IS neighbor relationship is deleted after you reset a specified IS-IS neighbor. Exercise caution when running this command.

Procedure

  • Reset IS-IS data structure.

    Run the reset isis all[ process-id | vpn-instance vpn-instance-name ] command to reset IS-IS data structure.

  • Reset IS-IS neighbor relationship.

    Run the reset isis peer system-id [ process-id | vpn-instance vpn-instance-name ] command to reset a specific IS-IS neighbor.

    After the IS-IS routing policy or the protocol changes, you can reset a specific IS-IS neighbor to validate the new configuration.

  • Reset IS-IS statistics

    Run the reset isis error [ process-id | vpn-instance vpn-instance-name ] or reset isis error interface interface-type interface-number command to clear information about incorrect LSPs and Hello packets received by the specified interface or process.

    Run the reset isis statistics { packet | socket } [ interface [ interface-type interface-number ] ] command to clear IS-IS statistics on the specified interface.

    Run the reset isis [ process-id ]statistics packet [ lsp ] or reset isis statistics packet lsp [ process-id ] command to clear IS-IS statistics on the specified process.

    Run the reset isis process-id suppress-flapping peer [ interface-type interface-number ] [ notify-peer ] command to exit from IS-IS neighbor relationship flapping suppression.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100074760

Views: 56595

Downloads: 62

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next