No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Unicast Routing

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of IP Unicast Routing, including IP Routing, Static Route, RIP, RIPng, OSPF, OSPFv3, IPv4 IS-IS, IPv6 IS-IS, BGP, Routing Policy, and PBR.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Resetting BGP Connections

Resetting BGP Connections

Context

Running the reset bgp command to reset BGP connections will interrupt BGP peer relationships between BGP devices. Exercise caution when you use this command.

When the BGP routing policy changes, for example, the switch does not support the route-refresh capability, reset BGP connections to make the modification take effect.

Procedure

  • To reset all BGP connections, run the reset bgp all command in the user view.
  • To reset the BGP connection with a specified AS, run the reset bgp { as-number-plain | as-number-dot } command in the user view.
  • To reset the BGP connection with a specified peer, run the reset bgp ipv4-address command in the user view.
  • To reset all EBGP connections, run the reset bgp external command in the user view.
  • To reset the BGP connection with a specified peer group, run the reset bgp group group-name command in the user view.
  • To reset all IBGP connections, run the reset bgp internal command in the user view.
  • To reset the MBGP connection with a specified peer, run the reset bgp multicast peer-address command in the user view.
  • To reset all MBGP connections, run the reset bgp multicast all command in the user view.
  • To reset the MBGP connection with all the peers in a specified peer group, run the reset bgp multicast group group-name command in the user view.
  • To reset all external connections, run the reset bgp multicast external command in the user view.
  • To reset all internal connections, run the reset bgp multicast internal command in the user view.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100074760

Views: 58665

Downloads: 63

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next