No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Unicast Routing

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of IP Unicast Routing, including IP Routing, Static Route, RIP, RIPng, OSPF, OSPFv3, IPv4 IS-IS, IPv6 IS-IS, BGP, Routing Policy, and PBR.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Creating an OSPF Area

Creating an OSPF Area

Context

More and more devices are deployed with the expansion of the network scale. As a result, each device has to maintain a large LSDB, which becomes a heavy burden. OSPF solves this problem by dividing an AS into areas. An area is regarded as a logical device group. Each group is identified by an area ID. The borders of an area are devices, rather than links. A network segment (or a link) belongs to only one area; that is, each OSPF interface must be specified to an area.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run ospf [ process-id | router-id router-id | vpn-instance vpn-instance-name ] *

    An OSPF process is enabled, and the OSPF view is displayed.

  3. Run area area-id

    An OSPF area is created and the area view is displayed.

    Areas are not equally important. The area with ID 0 is called the backbone area. The backbone area is responsible for forwarding inter-area routing information. In addition, routing information between non-backbone areas must be forwarded through the backbone area.

  4. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100074760

Views: 48942

Downloads: 58

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next