No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Unicast Routing

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of IP Unicast Routing, including IP Routing, Static Route, RIP, RIPng, OSPF, OSPFv3, IPv4 IS-IS, IPv6 IS-IS, BGP, Routing Policy, and PBR.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking RIP Packets with Metric 0

Checking RIP Packets with Metric 0

Context

By default, the device does not accept the RIP packets with metric 0. Therefore, the RIP interface discards all the RIP packets with metric 0. Some third-party devices on the network accept the RIP packets with metric 0. To ensure that the Huawei devices can work with the third-party devices, run the undo zero-metric-check command.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run rip [ process-id ]

    A RIP process is created and the RIP view is displayed.

  3. Run undo zero-metric-check

    Interfaces are allowed to accept the RIP packets with metric 0.

  4. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100074760

Views: 57864

Downloads: 63

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next