No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Unicast Routing

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of IP Unicast Routing, including IP Routing, Static Route, RIP, RIPng, OSPF, OSPFv3, IPv4 IS-IS, IPv6 IS-IS, BGP, Routing Policy, and PBR.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview of BGP

Overview of BGP

Definition

The Border Gateway Protocol (BGP) is a path vector protocol that allows devices between Autonomous Systems (ASs) to communicate and selects optimal routes. BGP-1 (defined in RFC 1105), BGP-2 (defined in RFC 1163), and BGP-3 (defined in RFC 1267) are three earlier versions of BGP. BGP-4 (defined in RFC 1771) has been used since 1994. Since 2006, unicast IPv4 networks have been using BGP-4 defined in RFC 4271, and other networks (such as IPv6 networks) have been using MP-BGP defined in RFC 4760.

MP-BGP is an extension of BGP-4 and applies to different networks; however, the original message exchange and routing mechanisms of BGP-4 are not changed. MP-BGP applications on IPv6 unicast and IPv4 multicast networks are called BGP4+ and Multicast BGP (MBGP) respectively.

Purpose

A network is divided into different ASs to facilitate the management over the network. In 1982, the Exterior Gateway Protocol (EGP) was developed to dynamically exchange routing information between ASs. EGP advertises only reachable routes but does not select optimal routes or prevent routing loops. Therefore, EGP cannot meet network management requirements.

BGP was designed to replace EGP. Different from EGP, BGP can select optimal routes, prevent routing loops, transmit routing information efficiently, and maintain a large number of routes.

Although BGP is used to transmit routing information between ASs, BGP is not the best choice in some scenarios. For example, on the egress connecting a data center to the Internet, static routes instead of BGP are used to prevent a huge number of Internet routes from affecting the data center internal network.

Benefits

BGP ensures high network security, flexibility, stability, reliability, and efficiency:
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100074760

Views: 57379

Downloads: 62

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next