No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Security

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of Security, including ACL, local attack defense, MFF, attack defense, traffic suppression and storm control, ARP security, Port security, DHCP snooping, ND snooping, PPPoE+, IPSG, SAVI, separating the management plane from the service plane, security risks.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring AAA Schemes

Configuring AAA Schemes

Context

To use RADIUS AAA, set the authentication mode in the authentication scheme and accounting mode in the accounting scheme to RADIUS.

When configuring RADIUS authentication, you can specify local authentication as the backup. This allows local authentication or non-authentication to be implemented if RADIUS authentication fails.

Procedure

  • Configure an authentication scheme.
    1. Run system-view

      The system view is displayed.

    2. Run aaa

      The AAA view is displayed.

    3. Run authentication-scheme authentication-scheme-name

      An authentication scheme is created and the authentication scheme view is displayed, or the view of an existing authentication scheme is displayed.

      A default authentication scheme named default is available on the device. This authentication scheme can be modified but not deleted.

    4. Run authentication-mode radius

      The RADIUS authentication mode is specified.

      By default, local authentication is used.

      To use local authentication as the backup, run the authentication-mode radius local command.

      NOTE:

      If multiple authentication modes are configured in an authentication scheme, authentication modes are prioritized in the order in which they were configured. The device uses the authentication mode that was configured later only when it does not receive any response from the current authentication mode. The device stops authentication if the current authentication fails.

    5. (Optional) Run authentication-type radius mschapv1

      The RADIUS authentication type is set to Microsoft Challenge Handshake Authentication Protocol version 1 (MSCHAPv1).

      The default RADIUS authentication type is PAP.

    6. Run commit

      The configuration is committed.

  • Configure an accounting scheme.
    1. Run system-view

      The system view is displayed.

    2. Run aaa

      The AAA view is displayed.

    3. Run accounting-scheme accounting-scheme-name

      An accounting scheme is created and the accounting scheme view is displayed, or the view of an existing accounting scheme is displayed.

      A default accounting scheme named default is available on the device. This accounting scheme can be modified but not deleted.

    4. Run accounting-mode radius

      The accounting mode is specified.

      The default accounting mode is none.

    5. Run commit

      The configuration is committed.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100074765

Views: 18511

Downloads: 61

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next