No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Security

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of Security, including ACL, local attack defense, MFF, attack defense, traffic suppression and storm control, ARP security, Port security, DHCP snooping, ND snooping, PPPoE+, IPSG, SAVI, separating the management plane from the service plane, security risks.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Example for Using User-Defined ACLs to Filter the Specified Packets

Example for Using User-Defined ACLs to Filter the Specified Packets

Networking Requirements

As shown in Figure 3-8, users are connected to the Switch through 10GE1/0/1. The Switch needs to discard certain packets sent by users (4 bytes behind the 14th byte in the packet match 0x0180C200).

Figure 3-8 Using a user-defined ACL to filter the specified packets

Configuration Roadmap

The following configurations are performed on the Switch. The configuration roadmap is as follows:

  1. Configure a user-defined ACL and an ACL-based traffic classifier to filter certain packets (4 bytes behind the 14th byte in the packet match 0x0180C200).
  2. Configure a traffic behavior to discard the packets matching the ACL.
  3. Configure and apply a traffic policy to make the ACL and traffic behavior take effect.


  1. Configure an ACL.

    # Configure a user-defined ACL.

    <HUAWEI> system-view
    [~HUAWEI] sysname Switch
    [*Switch] acl 5000
    [*Switch-acl-user-5000] rule deny l2-head 0x0180C200 0xFFFFFFFF 14
    [*Switch-acl-user-5000] quit

  2. Creating a traffic classifier based on the user-defined ACL.

    # Configure the traffic classifier tc1 to classify packets that match ACL 5000.

    [*Switch] traffic classifier tc1
    [*Switch-classifier-tc1] if-match acl 5000
    [*Switch-classifier-tc1] quit

  3. Configure a traffic behavior.

    # Configure the traffic behavior tb1 to reject packets.

    [*Switch] traffic behavior tb1
    [*Switch-behavior-tb1] deny
    [*Switch-behavior-tb1] quit

  4. Configure a traffic policy.

    # Configure a traffic policy, and bind the traffic classifier and traffic behavior to the traffic policy.

    [*Switch] traffic policy tp1
    [*Switch-trafficpolicy-tp1] classifier tc1 behavior tb1
    [*Switch-trafficpolicy-tp1] quit

  5. Apply the traffic policy to an interface.

    # Apply the traffic policy to the inbound direction of 10GE1/0/1.

    [*Switch] interface 10ge 1/0/1
    [*Switch-10GE1/0/1] traffic-policy tp1 inbound
    [*Switch-10GE1/0/1] quit
    [*Switch] commit

  6. Verify the configuration.

    # Check the ACL configuration.

    [~Switch] display acl 5000
    User ACL 5000, 1 rule
    ACL's step is 5
     rule 5 deny 0x0180c200 0xffffffff 14 (0 times matched)

    # Check the traffic classifier configuration.

    [~Switch] display traffic classifier tc1
      Traffic Classifier Information:
        Classifier: tc1
          Type: OR
            if-match acl 5000

    # Check the traffic policy configuration.

    [~Switch] display traffic policy tp1
      Traffic Policy Information:
        Policy: tp1
          Classifier: tc1
            Type: OR
          Behavior: tb1

Configuration Files

# Switch configuration file

sysname Switch
acl number 5000
 rule 5 deny 0x0180c200 0xffffffff 14
traffic classifier tc1 type or
 if-match acl 5000
traffic behavior tb1
traffic policy tp1
 classifier tc1 behavior tb1 precedence 5
interface 10GE1/0/1
 traffic-policy tp1 inbound
Updated: 2019-04-20

Document ID: EDOC1100074765

Views: 22514

Downloads: 92

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next