No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Security

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of Security, including ACL, local attack defense, MFF, attack defense, traffic suppression and storm control, ARP security, Port security, DHCP snooping, ND snooping, PPPoE+, IPSG, SAVI, separating the management plane from the service plane, security risks.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Gratuitous ARP Packet Sending

Configuring Gratuitous ARP Packet Sending

Context

If an attacker forges the gateway address to send ARP packets to other user hosts, ARP entries on the hosts record the incorrect gateway address. As a result, the gateway cannot receive data sent from the hosts. You can enable gratuitous ARP packet sending on the gateway. Then the gateway sends gratuitous ARP packets at intervals to update the ARP entries of authorized users so that the ARP entries contain the correct MAC address of the gateway.

You can configure gratuitous ARP packet sending globally or on an interface.
  • If gratuitous ARP packet sending is enabled globally, all interfaces have this function enabled by default.
  • If gratuitous ARP packet sending is enabled globally and on an interface simultaneously, the configuration on the interface takes precedence over the global configuration.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number

    The interface view is displayed.

    NOTE:

    If you intend to configure gratuitous ARP packet sending in the system view, skip this step.

  3. Run arp gratuitous-arp send enable

    Gratuitous ARP packet sending is enabled.

    By default, gratuitous ARP packet sending is disabled.

  4. (Optional) Run arp gratuitous-arp send interval interval-time

    The interval for sending gratuitous ARP packets is set.

    By default, the interval for sending gratuitous ARP packets is 60 seconds.

  5. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100074765

Views: 18673

Downloads: 64

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next