No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Security

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of Security, including ACL, local attack defense, MFF, attack defense, traffic suppression and storm control, ARP security, Port security, DHCP snooping, ND snooping, PPPoE+, IPSG, SAVI, separating the management plane from the service plane, security risks.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Creating a TCAM ACL Customization Profile or Preset Profile

Creating a TCAM ACL Customization Profile or Preset Profile

Prerequisites

TCAM ACL customization has been enabled.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Create a TCAM ACL customization profile or preset profile.

    • Run system tcam acl template template-name

      A TCAM ACL customization profile is created and its view is displayed, or the view of an existing TCAM ACL customization profile is displayed.

    • Run system tcam acl predefined template

      A TCAM ACL preset profile is created.

      NOTE:

      Only the CE6865EI, CE8861EI, CE8868EI, and CE8850-64CQ-EI support this command.

      After this command is executed, the system automatically generates the preset profile, name of the group in the preset profile, matched fields in the preset profile, and actions. Then you need to run the system tcam acl template template-name { slot slot-id | all } command to apply the TCAM ACL preset profile to the card or globally to configure the TCAM ACL customization function.

  3. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100074765

Views: 20579

Downloads: 88

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next