No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Security

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of Security, including ACL, local attack defense, MFF, attack defense, traffic suppression and storm control, ARP security, Port security, DHCP snooping, ND snooping, PPPoE+, IPSG, SAVI, separating the management plane from the service plane, security risks.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Protocol Structure

Protocol Structure

As shown in Figure 16-1, SSL functions between the application layer and transport layer. SSL is composed of two layers: the SSL Record Protocol at the bottom layer and the SSL Handshake protocol, SSL Change Cipher Spec Protocol, and SSL Alert Protocol at the upper layer.
Figure 16-1 SSL protocol stack
  • SSL Record Protocol: divides upper-layer data into blocks, computes the data, adds Message Authentication Code (MAC), encrypts the data to form record blocks, and sends the record blocks to the peer. The SSL Record Protocol implements data transmission.
  • SSL Handshake Protocol: used before application data is transmitted. The SSL Handshake Protocol negotiates a cipher suite including an encryption algorithm, a key exchange algorithm, and a MAC algorithm, authenticates server and client, and exchanges a key securely between the server and client.
  • SSL Change Cipher Spec Protocol: used by both the client and server to send a Change Cipher Spec message to notify each other that subsequent packets will be protected using the new cipher suite and key.
  • SSL Alert Protocol: reports alarms about the handshake or data transmission process to the remote end, so that the remote end can take corresponding measures. An alarm message conveys the severity of the message and description of the alarm.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100074765

Views: 18740

Downloads: 64

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next