No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Security

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of Security, including ACL, local attack defense, MFF, attack defense, traffic suppression and storm control, ARP security, Port security, DHCP snooping, ND snooping, PPPoE+, IPSG, SAVI, separating the management plane from the service plane, security risks.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Example for Configuring the Device as the HTTP Client to Log In to Another Device

Example for Configuring the Device as the HTTP Client to Log In to Another Device

You can configure HTTP for device login, so that you can log in to an HTTP server from an HTTP client to download the desired certificate.

Networking Requirements

To enable an HTTP client to download a certificate from an HTTP server, use HTTP. On the network shown in Figure 16-8, the route between the device functioning as an HTTP client and the HTTP server is reachable. You can log in to the HTTP server from the HTTP client to download a certificate from the server.

The server supports SSL policies. To improve data transmission security, configure an SSL policy on the HTTP client.

Figure 16-8 Device login using HTTP

Configuration Roadmap

The configuration roadmap is as follows:

  1. Configure an SSL policy on the HTTP client.

  2. Configure the HTTP client.

Procedure

  1. Configure an SSL policy on the HTTP client.

    <HUAWEI> system-view
    [~HUAWEI] ssl-policy policy1
    [*HUAWEI-ssl-policy-policy1] certificate load pem-cert a_servercertchain2_pem_dsa.pem key-pair dsa key-file a_serverkeychain2_pem_dsa.pem auth-code cipher 123456
    [*HUAWEI-ssl-policy-policy1] trusted-ca load pem-ca a_rootcertchain2_pem_dsa.pem
    [*HUAWEI-ssl-policy-policy1] commit
    [~HUAWEI-ssl-policy-policy1] quit

  2. Configure the HTTP client.

    [~HUAWEI] http
    [*HUAWEI-http] client ssl-policy policy1
    [*HUAWEI-http] client ssl-verify peer 
    [*HUAWEI-http] commit
    [~HUAWEI-http] quit

  3. Check whether the HTTP client is successfully configured.

    [~HUAWEI] display ssl policy
           SSL Policy Name: policy1
         Policy Applicants: HTTP-CLIENT 
             Key-pair Type: DSA
     Certificate File Type: PEM
          Certificate Type: certificate
      Certificate Filename: a_servercertchain2_pem_dsa.pem
         Key-file Filename: a_serverkeychain2_pem_dsa.pem
                 Auth-code: ******
                       MAC:
               Issuer name: HUAWEI
       Validity Not Before: 2008-07-04 06:30:11Z
        Validity Not After: 2018-07-02 06:30:11Z
                  CRL File:
           Trusted-CA File:
         Trusted-CA File 1: Format = PEM, Filename = a_rootcertchain2_pem_dsa.pem

Configuration Files

  • HTTP client configuration file

    #
    ssl policy policy1
     certificate load pem-cert a_servercertchain2_pem_dsa.pem key-pair dsa key-file a_serverkeychain2_pem_dsa.pem auth-code cipher %^%#<`c/:cbTs/'sK\S+ct)8ia_d!Ukn|&7pOM!5|dT6%^%#
     trusted-ca load pem-ca a_rootcertchain2_pem_dsa.pem
    #
    http
     client ssl-policy policy1
     client ssl-verify peer
    #
    return
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100074765

Views: 28603

Downloads: 97

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next