No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Security

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of Security, including ACL, local attack defense, MFF, attack defense, traffic suppression and storm control, ARP security, Port security, DHCP snooping, ND snooping, PPPoE+, IPSG, SAVI, separating the management plane from the service plane, security risks.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring the Maximum Number of Concurrent Access Users on an Interface

(Optional) Configuring the Maximum Number of Concurrent Access Users on an Interface

Context

You can configure the maximum number of concurrent 802.1x authentication users on an interface. When the number of access users reaches the maximum, new users for 802.1x authentication cannot access the network through the interface.

NOTE:

If the number of current online users on an interface has exceeded the maximum number, online users are not affected but new access users are limited.

This command can be configured in the system view or interface view. In the system view, the command can be configured on one or more interfaces; in the interface view, the command can only be configured on a specified interface.

Procedure

  • In the system view,

    1. Run system-view

      The system view is displayed.

    2. Run dot1x max-user user-number interface interface-type { interface-number1 [ to interface-number2 ] } &<1-10>

      The maximum number of concurrent 802.1x authentication users on the interface is configured.

      By default, a maximum of 3072 802.1x authentication users are allowed to access through an interface.

    3. Run commit

      The configuration is committed.

  • In the interface view,

    1. Run system-view

      The system view is displayed.

    2. Run interface interface-type interface-number

      The interface view is displayed.

    3. Run dot1x max-user user-number

      The maximum number of concurrent 802.1x authentication users on the interface is configured.

      By default, a maximum of 3072 802.1x authentication users are allowed to access through an interface.

    4. Run commit

      The configuration is committed.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100074765

Views: 28611

Downloads: 97

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next