No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Security

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of Security, including ACL, local attack defense, MFF, attack defense, traffic suppression and storm control, ARP security, Port security, DHCP snooping, ND snooping, PPPoE+, IPSG, SAVI, separating the management plane from the service plane, security risks.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Domain

Configuring a Domain

Context

The created authentication and authorization schemes are in effect only when they are applied to a domain. When local authentication and authorization are used, the default accounting mode is non-accounting.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run aaa

    The AAA view is displayed.

  3. Run domain domain-name

    A domain is created and the domain view is displayed, or the view of an existing domain is displayed.

    Two default domains named default and default_admin exists on the device. The two domains can be modified but not deleted.

    NOTE:
    • If an entered user name does not contain the domain name, the user is authenticated in the default domain. You need to run the default-domain admin domain-name command to specify the default global domain.
    • If an entered user name contains the domain name, the domain-name parameter must be correctly specified.

  4. Run authentication-scheme authentication-scheme-name

    An authentication scheme is applied to the domain.

    By default, the authentication scheme named default is applied to a domain.

  5. Run authorization-scheme authorization-scheme-name

    An authorization scheme is applied to the domain.

    By default, the authorization scheme named default is applied to a domain, and the default authorization mode is local authorization.

  6. (Optional) Run block

    The domain state is set to block.

    When a domain is in the blocking state, users in this domain cannot log in. By default, a created domain is in the active state.

  7. (Optional) Run service-type { dot1x | ftp | http | snmp | ssh | telnet | terminal } *

    The access type is specified for users in the domain.

    By default, a local user can use any access type.

  8. (Optional) Run access-limit max-number

    The maximum number of access users is set for the domain.

    By default, the number of access users is not limited.

  9. (Optional) Run adminuser-priority level

    The default user level is set for administrators in the domain.

    By default, no default user level is set for administrators in an AAA domain.

  10. Run quit

    You exit the domain view.

  11. (Optional) Run default-domain admin domain-name

    A global default domain is specified for administrators.

    The global default domain for administrators is default_admin.

  12. (Optional) Run domain-name-delimiter delimiter

    The domain name delimiter is set.

    The default domain name delimiter is @.

  13. (Optional) Run domainname-parse-direction { left-to-right | right-to-left }

    The direction in which the domain name is parsed is specified.

    By default, a domain name is parsed from left to right.

  14. (Optional) Run domain-location { after-delimiter | before-delimiter }

    The position of the domain name is specified.

    By default, the domain name is placed after the domain name delimiter.

  15. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100074765

Views: 18697

Downloads: 64

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next