No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Security

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of Security, including ACL, local attack defense, MFF, attack defense, traffic suppression and storm control, ARP security, Port security, DHCP snooping, ND snooping, PPPoE+, IPSG, SAVI, separating the management plane from the service plane, security risks.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the IPSG Configuration

Verifying the IPSG Configuration

Procedure

  1. Run the display user-bind static { { interface interface-type interface-number | ip-address ip-address | mac-address mac-address | vlan vlan-id } * | all } [ verbose ] to view static binding entries.
  2. Run the display ip source check user-bind [ vlan vlan-id | interface interface-type interface-number ] command to view IPSG configurations.
  3. Run the display ip source check user-bind status [ dynamic | static ] [ interface interface-type interface-number | ip-address ip-address | mac-address mac-address | vlan vlan-id ] * [ valid | invalid ] [ slot slot-id ] command to view IPSG binding entries and IPSG status.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100074765

Views: 18620

Downloads: 63

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next