No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Security

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of Security, including ACL, local attack defense, MFF, attack defense, traffic suppression and storm control, ARP security, Port security, DHCP snooping, ND snooping, PPPoE+, IPSG, SAVI, separating the management plane from the service plane, security risks.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing MACsec Statistics

Clearing MACsec Statistics


To locate MACsec faults, you need to collect MACsec statistics within a certain period of time. Before displaying MACsec statistics, delete historical MACsec statistics.

Statistics cannot be restored after they are cleared. Exercise caution when you clear them.


  • Run the reset mka statistics interface interface-type interface-number command in the user view to delete MKA protocol packet statistics on the specified interface.
  • Run the reset macsec statistics interface interface-type interface-number command in the user view to delete MACsec data packet statistics on a specified interface.
Updated: 2019-04-20

Document ID: EDOC1100074765

Views: 28191

Downloads: 97

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next