No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Security

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of Security, including ACL, local attack defense, MFF, attack defense, traffic suppression and storm control, ARP security, Port security, DHCP snooping, ND snooping, PPPoE+, IPSG, SAVI, separating the management plane from the service plane, security risks.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the DHCP Snooping Attack Defense Configuration

Verifying the DHCP Snooping Attack Defense Configuration

Context

After DHCP snooping attack defense is completely configured, check the configured parameters.

Procedure

  • Run the display dhcp snooping [ interface interface-type interface-number | vlan vlan-id ] command to view DHCP snooping running information.
  • Run the display mac-address snooping [ interface interface-type interface-number | vlan vlan-id ] * command to view static MAC address entries generated from the DHCP snooping binding table.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100074765

Views: 22654

Downloads: 92

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next