No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Security

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of Security, including ACL, local attack defense, MFF, attack defense, traffic suppression and storm control, ARP security, Port security, DHCP snooping, ND snooping, PPPoE+, IPSG, SAVI, separating the management plane from the service plane, security risks.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring the Application Server IP Address

(Optional) Configuring the Application Server IP Address

Context

In addition to the gateway, application servers such as the DHCP, multicast, or other types of servers may be deployed on a network. When users access an application server whose IP address is not specified on the MFF-enabled device, the MFF-enabled device forwards user traffic to the gateway. The gateway then forwards it to the application server. This increases uplink traffic, consumes bandwidth, and wastes forwarding resources on the gateway.

To address this problem, specify IP addresses of accessible application servers on the MFF-enabled device. MFF provides a mechanism that is similar to ARP proxy to process such traffic, so users can correctly access all the specified application servers and directly communicate with application servers at Layer 2.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run vlan vlan-id

    The VLAN view is displayed.

  3. Run mac-forced-forwarding server server-ip & <1–16>

    The application server IP address is configured.

    By default, no application server IP address is configured.

  4. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100074765

Views: 18476

Downloads: 61

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next