No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Security

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of Security, including ACL, local attack defense, MFF, attack defense, traffic suppression and storm control, ARP security, Port security, DHCP snooping, ND snooping, PPPoE+, IPSG, SAVI, separating the management plane from the service plane, security risks.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the ACL Configuration

Verifying the ACL Configuration

Procedure

  • Run the display acl { acl-number | name acl-name | all } command to view the configuration about a specific ACL or all ACLs.
  • Run the display time-range { all | time-name } command to view information about the time range.
  • Run the display acl hardware statistics [ acl-number | name acl-name ] command to view statistics about packets matching a hardware ACL.

    NOTE:
    • The switch can display only the statistics about the packets matching hardware ACLs referenced by the MQC and ACL-based traffic policy. In addition, you need to run the statistics enable command to enable traffic statistics collection and run the traffic-statistics, traffic-statistics, traffic-statistics, or traffic-statistics command to enable traffic statistics collection for a simplified traffic policy.
    • The protocol packets, such as FTP, TFTP, Telnet, SNMP, HTTP, routing, and multicast packets, are sent to the CPU and matched against software ACLs. To view the number of times packets match software ACL rules, run the display acl command.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100074765

Views: 23303

Downloads: 93

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next