No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Security

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of Security, including ACL, local attack defense, MFF, attack defense, traffic suppression and storm control, ARP security, Port security, DHCP snooping, ND snooping, PPPoE+, IPSG, SAVI, separating the management plane from the service plane, security risks.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ARP Gateway Anti-Collision

ARP Gateway Anti-Collision

As shown in Figure 10-5, attacker B forges the gateway address to send a bogus ARP packet to user A. User A considers the attacker to be the gateway. User A then records an incorrect ARP entry for the gateway. As a result, the gateway cannot receive packets from user A and their communication is interrupted.

Figure 10-5 ARP gateway collision

To defend against bogus gateways, you can enable the ARP bogus gateway attack defense function on gateways directly connected to the host. Such gateways must meet the following conditions:
  • A VLANIF or VBDIF interface is used to receive packets.
  • The source IP address of received packets is the same as the IP address of the inbound interface.
  • The source MAC address of the Ethernet header in received packets is different from the source MAC address of ARP packets or the interface MAC address.
  • The source MAC address of received packets is not a virtual MAC address of the Virtual Router Redundancy Protocol (VRRP) group.
    NOTE:

    A VRRP group, also called a virtual router, serves as the default gateway for hosts on a LAN. A virtual router has a virtual MAC address that is generated based on the virtual router ID. The virtual MAC address is in the format of 00-00-5E-00-01-{VRID}(VRRP). The virtual router sends ARP Reply packets using the virtual MAC address instead of the interface MAC address.

If the preceding conditions are met, the ARP packets are considered having a gateway address conflict, and the device generates ARP attack defense entries (such entries are not generated in virtual MAC access scenarios.) and discards the packets then received from the interface with the same VLAN ID or the same source MAC address in the same BD. In this manner, the ARP packets that have a gateway address conflict can be prevented from being broadcast in the VLAN or BD.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100074765

Views: 18729

Downloads: 64

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next