No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Security

CloudEngine 8800, 7800, 6800, and 5800 V200R005C10

This document describes the configurations of Security, including ACL, local attack defense, MFF, attack defense, traffic suppression and storm control, ARP security, Port security, DHCP snooping, ND snooping, PPPoE+, IPSG, SAVI, separating the management plane from the service plane, security risks.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Creating an Advanced ACL6

Creating an Advanced ACL6

Context

An advanced ACL6 can classify IPv6 packets based on the following attributes: source IPv6 address, destination IPv6 address, protocol type supported by IPv6, and protocol-specific features such as the source and destination TCP port numbers, ICMPv6 protocol type, and ICMPv6 Code.

Before configuring an advanced ACL6, you need to create an advanced ACL6.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run acl ipv6 { [ number ] acl6-number | name acl6-name [ advance ] }

    An advanced ACL6 is created, and the advanced ACL6 view is displayed.

    The parameter acl6-number specifies the number of an advanced ACL6. The value ranges from 3000 to 3999.

    By default, no ACL6 is created.

  3. (Optional) Run step step

    The ACL6 increment is configured.

    By default, the increment between ACL6 rule IDs is 5.

  4. (Optional) Run description text

    The ACL6 description is configured.

    By default, no description is configured for an ACL6.

  5. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100074765

Views: 18517

Downloads: 61

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next